Hello everyone. I'm new here and I am sorry if I do something wrong, but I think there is a problem with the configuration of the bootloader file name in the esp32 module.

Fresh delivered Freematics ONE+ Properly configured environment (vscode + platformIO) I am following the default steps. Build (With no error) Upload (With this error)

Auto-detected: COM4 Uploading .pio\build\esp32dev\firmware.bin usage: esptool write_flash [-h] [--erase-all] [--flash_freq {keep,40m,26m,20m,80m}] [--flash_mode {keep,qio,qout,dio,dout}] [--flash_size FLASH_SIZE] [--spi-connection SPI_CONNECTION] [--no-progress] [--verify] [--encrypt] [--encrypt-files [ ...]] [--ignore-flash-encryption-efuse-setting] [--compress | --no-compress] [ ...] esptool write_flash: error: argument : [Errno 2] No such file or directory: 'C:\\Users\\USERNAME\\.platformio\\packages\\framework-arduinoespressif32\\tools\\sdk\\esp32\\bin\\bootloader__40m.bin' *** [upload] Error 2

the platformio.ini is the default one from freematic GitHub repo

Also I'm trying to change the version (I'm not sure if this is the right way, but it didn't work anyway) Change platform_packages = platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.5 to platform_packages = platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.6

Any suggestion on what to do ?

Edit: found temporary solutions: using ver 2.0.3